Detailed Product Description

1.colors being an optional design choice.

2.Low water absorption (17.2%) supports direct use for exterior walls.

3.High bending strength (3.4 Mpa) provides a secure and durable core covered by an especially high strength (12.8 Mpa) exterior face.

4.Low shrinkage (<0.5mm/ Exact replicas of natural stones capture the texture and color of real stones with specific m), no crevasse cracks.

5.Good freeze-thaw properties allow the stone veneer to be applied in extreme conditions.

6.Low density only half that of natural stone facilitates easy installation and reduced transportation costs.

7.Free of harmful radioactivity; pigment is lead-free.

How to install

1.Ensure wall surface is free from dirt, paint or grease. If necessary, roughen wall and apply motar on the wall for better gripping. Apply tile adhesive on the entire back side of the stone. Avoid cement stain on stone surface by using tools, instead of bare hand.

2.Always start with corner component before laying the flat component. Start for one end and work towards the other. Press each stone firmly into the motar bed in a sliding motion. Ensure that individual stones are placed as closely as possible, creating uniform joints between them.

3.For random series with gaps, fill the joints with color grout using a grout bag. Better results can be archived by selecting color grouts which is similar in color with the stone. It is recommended to use a trowel to archive a smooth and even finishing of color grout inside the joints.

4.Before the grout harden, use a stiff brush or wooden racking tool to remove excess grout or mortar from the surface of the stone. You may also use a wet brush to brush away small cement stains that got left behind.